Measure details
Units |
% RH ,°C ,°Ctd ,°Ctf ,°F ,°Ftf ,°Ftw ,ACH ,cfm ,daPa ,g/kg ,g/m³ ,inH₂O ,inWc ,kj/kg ,kPa ,m³/h ,mbar ,mmH₂O ,Pa |
---|---|
Alarm |
Buzzer (60 dB at 10 cm) |
Technical details
Parameters |
Absolute humidity ,Air Change Rate ,Air velocity ,Airflow ,CO ,COâ‚‚ ,Dew point ,Differential pressure ,Enthalpy ,Frost point ,Mixing Ratio ,Relative humidity ,Temperature ,VOC ,Wet-bulb temperature |
---|---|
Displays |
Graphic touch display |
IP Protection |
IP 66 ,VHP resistant (Vaporized hydrogen peroxide) |
Standards |
2012/19/EU WEEE ,2014/30/EU EMC ,2014/35/EU Low Voltage ,2014/53/EU RED ,2015/863 EU (RoHS 3) ,UKCA |
Wireless connection |
1 |
Power supply |
24 VAC / VDC ±10% |
Outputs |
3 x 0/4-20 mA or 3 x 0-5/10 V (4 wires) |
Ethernet communication |
No |
ModBus network |
Yes |
Instrument Dimensions
Length |
3 15/16 inches ,100 mm |
---|---|
Width |
1 27/32 inches , 47 mm |
Height |
9 7/32 inches , 234 mm |
Weight |
1 1/2 pounds , 684.4 g |
Operating temperature
Min |
-10.00 °C ,14.00 °F |
---|---|
Max |
122.00 °F ,50.00 °C |
Storage temperature
Min |
-10.00 °C ,14.00 °F |
---|---|
Max |
158.00 °F ,70.00 °C |
- 1 Si-CPE320 multifunction panel transmitter
- 1 integrated high accuracy differential pressure sensor (-250 to 250 Pa / -1.0 to 1.0 inHâ‚‚O)
- 3 analogue outputs
- 1 RS485 interface with ModBus RTU protocol
- 1 input for probes
- 1 adjusting certificate
Terminal blocks for power connection, and output connections - 1 front pressure connector cap with a pierced hole in the middle
- 1 silicone cap for closing a rear pressure connector
- 1 protective cap for frontal interface connection
- 1 protective cap for the external probe connector
- Si-CPE320: Optional wireless communication module
- Si-CPE320-W: Integrated wireless communication module