Ref:Si-PRO-V-300
Interchangeable hotwire probe for air velocity and temperature measurements.
Stainless steel body length 267 mm (10.51”), Ø 8 mm (0.31”).
Thanks to its design, it minimises the impact of the angle of the airflow on the measurements.
Main applications: laminar flow monitoring in clean rooms, isolators, glove boxes, fume hoods, isolation cabinets, pharma/cosmetic and semiconductors manufacturing facilities.
Si-ACC-RVP probe cable for connection to class 320 transmitters is needed.
| Units | °C, °F, ACH, cfm, dam³/h, fps, l/s, m/s, m³/h, m³/s |
|---|
| Temperature | 0.00 °C … 50.00 °C, 32.00 °F … 122.00 °F |
|---|---|
| Air velocity | 0.00 fps … 98.40 fps, 0.00 m/s … 30.00 m/s |
| Airflow (calculated parameter) | 0.00 cfm … 588577.00 cfm, 0.00 m³/h … 999999.00 m³/h |
| Air change rate (calculated parameter) | 0.00 ACH … 1000.00 ACH |
| Parameters | Air Change Rate, Air velocity, Airflow, Temperature |
|---|---|
| Wireless connection | No |
For demanding processes and climate control applications
Ref:
SI-PRO-U-I-100-H
The Si-PRO-U-I-100-H is an interchangeable, heated hygrometry probe for Si-C320 transmitters and it has been designed for being used in environments where there is constant high humidity or rapid oscillanting humidity where the probe’s performance and its tolerance to pollutants are key. Stainless steel body and sintered filter. Length 100 mm (3.94’’), Ø 13 mm (0.51’’).
It delivers dewpoint and frost point as a measurement. The relative humidity value, as well as the rest of psychrometric values can be calculated when the Si-PRO-T-150 temperature probe or an additional external temperature probe is connected to the Si-C320 transmitter using the Si-ACC-ETP adapter.
Main applications: industrial processes, air handling units, drying processes, pharma production machines.
Si-ACC-R2 probe cable for connection to class 320 transmitters is needed.
Operating systems
Windows 10
Control and configure the Class 320 transmitters from your computer via the Sauermann Control PC software, which allows you to manage all the device’s parameters via its USB cable.
This software can also easily update the firmware of the instrument and its probes.
Access to all parameters and options of the transmitters and their probes
Real-time measurement display
Configuration of the measurement channels
Configuration of analogue and digital outputs
Setting of alarm thresholds
Security locks management
Complete configuration of each probe
Autozero scheduling
Download the software to make the most of your device's capabilities.
Ref:
Si-PRO-U-I-150, Si-PRO-U-I-300, Si-PRO-U-150
Si-PRO-U-I-150 / Si-PRO-U-I-300
Hygrometry probe with stainless steel body with stainless steel filter. Autolocking connector.
Si-PRO-U-I-150: probe length 150 mm, Ø 13 mm.
Si-PRO-U-I-300: proble length 300 mm, Ø 13 mm.
Si-PRO-U-150
Polycarbonate hygrometry/temperature probe with plastic body and stainless steel filter.
Length 150 mm, Ø 13 mm. Autolocking connector.
Si-ACC-R2 probe cable for connection to class 320 transmitters is needed.
Interchangeable flush-mount hygrometry probe for cleanrooms.
Stainless steel body and sintered filter. Autolock connector.
Specifically designed to be installed inside clean rooms and other regulated environments where an accurate regulation or monitoring of the humidity is required.
Si-ACC-RVP cable is needed to connect to Si-CPE320 transmitter.
Ref:
Si-PRO-CO2, Si-PRO-CO, Si-PRO-VOC
Si-PRO-CO2: CO2 probe. Main applications: CO2 monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities.
Si-PRO-CO: CO probe. Main applications: CO monitoring in parking lots, boiler rooms and in industrial environments.
Si-PRO-VOC: VOC probe. Main applications: VOC monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities, Control of TVOC in pharmaceutical industries.
Plastic body, Ø 29.5 mm, length: 175 mm.
Si-ACC-R2 probe cable connection to class 320 transmitters is needed.
Control and configure the Class 320 transmitters with a smartphone or a tablet via the Sauermann Control mobile application, which allows you to manage all the device’s parameters via its wireless connection module.
This App can also easily update the firmware of the instrument and its probes.
Access to all parameters and options of the transmitters and their probes
Real-time measurement display
Configuration of the measurement channels
Configuration of analogue and digital outputs
Setting of alarm thresholds
Security locks management
Complete configuration of each probe
Autozero scheduling
Download the App to make the most of your device's capabilities.
Sauermann offers a wide range of accessories to support its Monostats, Class 110, 210, 310 and 320 transmitters and their probes, facilitating their installation in any situation:
Accessories for hygrometry transmitters (protection caps, salt solutions, sliding fittings and fixing flanges, protections)
Accessories for pressure transmitters (junctions, fittings, connection tubes)
Accessories for multifunction transmitters and flushmount multifunction transmitters (cable and extensions for interchangeable probes)
Software
Power supply (AC, DC)
Humidification
Dehumidification
HVAC Measuring instruments
HVAC Sensors & Field Devices
Air Particles Counting
Microbial Air Sampler