Products & Solutions

TotalSense PM/VOC/CO2/RH/TotalSense Duct

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Build a complete air quality system for indoor, duct, and outdoor
Six environmental sensors: PMx, VOC, CO2, RH, T, barometric pressure
BACnet/Modbus or analog outputs with set-point relay
Pair with an IOTBuddy for BACnet IP or IOT Connection

TotalSense PM/VOC/CO2/RH/TotalSense Outdoor

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Build a complete air quality system for indoor, duct, and outdoor
Seven environmental sensors: PMx, VOC, CO2, RH, T, ambient light, barometric pressure
BACnet/Modbus or analog outputs with set-point relay
Pair with an IOTBuddy for BACnet IP or IOT Connection

TR 61 / TR 62 Pt100 Temperature

TR 61/62 uses Pt100 probes with a measuring range of -100 to 400°C and an accuracy of ±0.4% of reading ±0.3°C.

Probe(s) not included, sold separately.

Transmitters and probes accessories

Sauermann offers a wide range of accessories to support its Monostats, Class 110, 210, 310 and 320 transmitters and their probes, facilitating their installation in any situation:

Accessories for hygrometry transmitters (protection caps, salt solutions, sliding fittings and fixing flanges, protections)
Accessories for pressure transmitters (junctions, fittings, connection tubes)
Accessories for multifunction transmitters and flushmount multifunction transmitters (cable and extensions for interchangeable probes)
Software
Power supply (AC, DC)

Transport bag For airflow cones

Kimo flow measurement cones are supplied with a fabric carry bag with zip fastening and adjustable shoulder strap.

Transport case MT 51

For class 50 / 110 portable instruments
Kimo’s MT 51 is a transport case.

U coefficient module

For class 210 / 310 multi-function portables
Ref:
MCU
Kimo’s U-coefficient for class 210 and 310 devices, allows to determine the heat transmission coefficient of a wall thanks to the temperature probes it is equipped with.

Ultrasonic humidifiers

This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.

The new humiSonic range comprises two versions, meeting the needs of all applications: humiSonic compact, small enough to be installed on a fan coil, and humiSonic direct, for room distribution.

Ultrasonic humidifiers feature a small water storage tank and piezoelectric transducers installed at the bottom of the tank. The surface of the transducer vibrates at very high speed (1.65 million times a second), a speed that does not allow the water to move due to its inertial mass. During the negative amplitude of the transducer cycle, a sudden void is created that brings about the production of microscopic bubbles, which are pushed to the surface of the water during the positive amplitude of the cycle. This effect is called cavitation.

During this process, the resulting intersecting sound waves created directly underneath the surface of the water cause very small droplets of water to separate, forming a fine mist of vapour that is immediately absorbed by the flow of air.

This ultrasound technology applied to CAREL air humidification solutions is efficient, reliable and versatile:

  • efficient, as ultrasonic humidifiers guarantee energy savings of 90% when compared to ordinary steam generators;
  • reliable, as humiSonic is guaranteed for 10,000 operating hours when running on demineralised water;
  • versatile, thanks to the size of the droplets produced (average diameter of 5 µm).This fundamental characteristic guarantees very fast absorption of the atomised water in the room or duct, avoiding possible condensation.

Vane Thermo-anemometer with integrated vane probe Si-VV3

The palm-sized Sauermann Si-VV3 vane thermo-anemometer easily measures airflow, air velocity & temperature with its vane probe.

VT 210 Thermo-hygrometer-anemometer

Specially designed for the control of ventilation systems, the VT 210 allows users to measure the air velocity, the airflow and the temperature in ducts.

Wall mount anti-theft device

For Kistock data loggers class 220 / 320
Kimo has a wall mount anti-theft device with a padlock. The system makes it possible to secure your Kistock data logger in sensitive sites.

Water Detector

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Mount to floor, drip pan, or condensate pan
Solid state relay–no moving parts to fail
Gold-plated sensing electrodes for long-life
Completely submersible