HM 50 Pin moisture meter

Pin-style meters usually have two metal pins that must physically penetrate a surface in order to take a moisture reading.

Kimo’s HM 50 Pin Moisture Meter provides accurate humidity percentage calculations and measurements of bricks, wood, plaster, and concrete.

Technical Data sheet

Easy to use
Compatible with wood (9 to 90%), plaster (0 to 15%), and bricks and concrete (0 to 15%)
Supplied with 2 pin sets

Hold function
Auto shut-off: 20 minutes
Adjustment certificate

Categories: HVAC Measuring instruments, Instrumentation, Pin moisture meters, Portable instruments

Measure details

Units	% RH

Measuring ranges

Wood type 1	10.00 % … 90.00 %
Wood type 2	9.00 % … 90.00 %
Plaster	0.10 % … 15.00 %
Brick and concrete	0.10 % … 15.00 %

Technical details

Parameters	Humidity
Displays	2-line display
IP Protection	IP 54
Battery life	180 hours
Standards	2011/65/EU RoHS II, 2012/19/EU WEEE, 2014/30/EU EMC, 2014/35/EU Low Voltage, UKCA
Power supply	4 batteries AAA LR03 1.5 V
Protective cover	No
Interchangeable module	No

Instrument Dimensions

Length	71.5 mm
Width	34.2 mm
Height	149.2 mm
Weight	200 g

Operating temperature

Min	0.00 °C
Max	50.00 °C

Storage temperature

Min	-20.00 °C
Max	80.00 °C

Telescopic extension RTE For portable instruments

TotalSense PM/VOC/CO2/RH/TotalSense Duct

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Build a complete air quality system for indoor, duct, and outdoor
Six environmental sensors: PMx, VOC, CO2, RH, T, barometric pressure
BACnet/Modbus or analog outputs with set-point relay
Pair with an IOTBuddy for BACnet IP or IOT Connection

Quick view

Micromanometer MP 210

Kimo’s MP 210 micromanometer measures pressure, air velocity, airflow, temperature, tachometry, gas leak and carbon monoxide (up to 6 simultaneous measurements).

Quick view

Vane Thermo-anemometer with integrated vane probe Si-VV3

The palm-sized Sauermann Si-VV3 vane thermo-anemometer easily measures airflow, air velocity & temperature with its vane probe.

Quick view

Impermeability special manometer for gas network MP 130

Made specifically for use in gas network testing, the Kimo MP 130 is an essential instrument for gas professionals.

Quick view

Hotwire Thermo-anemometer With integrated hotwire probe Si-VH3

The palm-sized Sauermann Si-VH3 hotwire thermo-anemometer easily measures airflow, air velocity & temperature with its hotwire probe with telescopic rod.

Quick view

TG UL Refrigerant Wall & Duct

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Refrigerant Sensor/Controller
Sense most A2L and A3 gases
Analog and BACnet/Modbus protocol options
Rugged ABS or Metal enclosure options
Operates as a stand-alone sensor or local controller

Quick view

Thermo-anemometer with integrated vane probe LV 110 / 111 / 117

The Kimo LV 110 / 111 / 117 displays velocity and temperature measurements.

Quick view

Temperature KT 50

When straightforward temperature readings are required, look no further than to the KT 50 Mini Data Logger.

Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.

Quick view

Digital Differential Pressure Manometer Si-PM3

The palm-sized Sauermann Si-PM3 digital differential pressure manometer easily measures pressure.

Quick view

EMX True RMS Energy Meter

Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
BACnet & Modbus, Pulse
Revenue grade metering (ANSI C12.20 Class 0.2 Standards)
Monitor loads from 0.25-6000A & 90-600V
Accurately measure harmonic loads

Quick view