Filter by Brand
Hygrometry probes
For class 210 / 310 multi-function portables
Ref:
SHR 110 / SHRF 110 /SHR 300 / SHRF 300
Kimo’s hygrometry probes measure humidity, dew point, and temperature.
Hygrometry probes For class 320 transmitters
Ref:
Si-PRO-U-I-150, Si-PRO-U-I-300, Si-PRO-U-150
Si-PRO-U-I-150 / Si-PRO-U-I-300
Hygrometry probe with stainless steel body with stainless steel filter. Autolocking connector.
Si-PRO-U-I-150: probe length 150 mm, Ø 13 mm.
Si-PRO-U-I-300: proble length 300 mm, Ø 13 mm.
Si-PRO-U-150
Polycarbonate hygrometry/temperature probe with plastic body and stainless steel filter.
Length 150 mm, Ø 13 mm. Autolocking connector.
Si-ACC-R2 probe cable for connection to class 320 transmitters is needed.
IAQ probes For class 320 transmitters
Ref:
Si-PRO-CO2, Si-PRO-CO, Si-PRO-VOC
Si-PRO-CO2: CO2 probe. Main applications: CO2 monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities.
Si-PRO-CO: CO probe. Main applications: CO monitoring in parking lots, boiler rooms and in industrial environments.
Si-PRO-VOC: VOC probe. Main applications: VOC monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities, Control of TVOC in pharmaceutical industries.
Plastic body, Ø 29.5 mm, length: 175 mm.
Si-ACC-R2 probe cable connection to class 320 transmitters is needed.
Immersed electrode humidifiers
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
The operation of immersed electrode humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water (Joule effect) until boiling, thus producing steam.
The quantity of steam produced is proportional to the electric current, which is in turn proportional to the water level.
This electric current is measured by a current transformer: by varying the level of water using a fill solenoid valve and due to the evaporation process, the current, and consequently steam production, can be modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam produced does not carry mineral salts, the salt concentration in the water and therefore the conductivity increases, and has to be periodically diluted by draining part of it using the drain pump and replacing it with new water.
In addition, scale forms over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing.
Compared to electric heater or gas-fired humidifiers, immersed electrode humidifiers:
are less expensive to purchase;
operate with drinking water (not completely demineralised or softened);
require periodical replacement (or cleaning) of the cylinder;
feature modulation suitable for comfort or industrial applications, without extreme requirements.
CAREL has been manufacturing immersed electrode humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software.
The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam.
Impermeability special manometer for gas network MP 130
Made specifically for use in gas network testing, the Kimo MP 130 is an essential instrument for gas professionals.
Infrared remote printer KIMP-23
For class 210 / 310 portable instruments
Kimo’s infra-red printer for portable instruments allows to print measurements.
IoTBuddy
Higher Reliability, Faster Installation, Superior Accuracy | Sense the Difference
Connects analog or Modbus RTU devices to cloud services, while still allowing BACnet/IP or Modbus/TCP connections for the same points.
Facilitates power over Ethernet (POE), Ethernet, or Wireless 2.4 GHz.
Small design to allow for installation in sensor housing or junction box.
Easy configuration via NFC or the IoTBuddy Hosted Web page.
KH 120 Temperature / Hygrometry
The KH 120 USB Data Logger measures temperature and hygrometry. It measures 50,000 points and records up to two parameters simultaneously.
These instruments are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
KH 220
Temperature / Hygrometry / Current / Voltage / Impulse / Water pressure / Light
The KH 220 Multifunction Data Logger is the answer when up to five parameters need to be recorded simultaneously.
Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
KH 50 Temperature / Hygrometry
When simple temperature and humidity readings are required, look no further than the KH 50 Data Logger. It has 16,000 measuring points.
Data Loggers are widely used in agriculture, industry and clinical laboratories to monitor a variety of parameters.
KILOG
Data processing software for Kistock data loggers
Ref:
KILOG
Operating systems
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP SP2/SP3
Kimo’s KILOG software helps configure, download and process data from Kistock.
KILOG-Lite
Ref:
KILOG-Lite
Operating systems
Windows 10
Windows 8
Windows 7
Windows Vista
Windows XP SP2/SP3
Kimo’s KILOG-Lite software allows users to configure Kistock data loggers.
Humidification
Dehumidification
HVAC Measuring instruments
HVAC Sensors & Field Devices
Air Particles Counting
Microbial Air Sampler