Temperature probe For class 320 transmitters

Ref:
Si-PRO-CO2, Si-PRO-CO, Si-PRO-VOC
Si-PRO-CO2: CO2 probe. Main applications: CO2 monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities.

Si-PRO-CO: CO probe. Main applications: CO monitoring in parking lots, boiler rooms and in industrial environments.

Si-PRO-VOC: VOC probe. Main applications: VOC monitoring (IAQ) in VAC systems of office buildings, commercial buildings, education facilities, Control of TVOC in pharmaceutical industries.

Plastic body, Ø 29.5 mm, length: 175 mm.

Si-ACC-R2 probe cable connection to class 320 transmitters is needed.

Interchangeable flush-mount hygrometry probe for cleanrooms.
Stainless steel body and sintered filter. Autolock connector.

Specifically designed to be installed inside clean rooms and other regulated environments where an accurate regulation or monitoring of the humidity is required.

Si-ACC-RVP cable is needed to connect to Si-CPE320 transmitter.

Ref:Si-PRO-V-300
Interchangeable hotwire probe for air velocity and temperature measurements.
Stainless steel body length 267 mm (10.51''), Ø 8 mm (0.31'').
Thanks to its design, it minimises the impact of the angle of the airflow on the measurements.

Main applications: laminar flow monitoring in clean rooms, isolators, glove boxes, fume hoods, isolation cabinets, pharma/cosmetic and semiconductors manufacturing facilities.

Si-ACC-RVP probe cable for connection to class 320 transmitters is needed.

For demanding processes and climate control applications
Ref:
SI-PRO-U-I-100-H
The Si-PRO-U-I-100-H is an interchangeable, heated hygrometry probe for Si-C320 transmitters and it has been designed for being used in environments where there is constant high humidity or rapid oscillanting humidity where the probe’s performance and its tolerance to pollutants are key. Stainless steel body and sintered filter. Length 100 mm (3.94’’), Ø 13 mm (0.51’’).
It delivers dewpoint and frost point as a measurement. The relative humidity value, as well as the rest of psychrometric values can be calculated when the Si-PRO-T-150 temperature probe or an additional external temperature probe is connected to the Si-C320 transmitter using the Si-ACC-ETP adapter.

Main applications: industrial processes, air handling units, drying processes, pharma production machines.

Si-ACC-R2 probe cable for connection to class 320 transmitters is needed.