FR850 – 1150T
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
Ask for a quotation
RELATED PRODUCTS
FSW140
The Fral FSW series fixed dehumidifiers are high-performance appliances, usable in a variety of applications. They are particularly suited to dehumidify swimming pool environments, since they are resistant to corrosion due to chlorine. They feature a high efficiency air filter in polyurethane, washable and easily replaceable, and the possibility of direct drain. Optionally, it is possible to install a condensate lifting pump that allows condensate pumping up to a height of 3.5 meters from the machine positioning level. The Fral fixed dehumidifiers series FSW can be equipped with electrical resistances or hot water coil for heating. Their elegant design makes them particularly suitable for installation in special environments such as libraries and offices.
Compressed air water atomisers
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
Compressed air humidifiers are the ideal humidification solution whenever a compressed air supply is available, as is the case in many industrial applications, even if humidification systems are often fitted with a dedicated air compressor. The humidifier essentially consists of a cabinet fitted with electronic controller that, using two independent connection pipe networks, supplies the spray nozzles with compressed air and water at the ideal pressure for instant operating conditions.
The units can be installed inside an AHU or directly in the room where humidity needs to be controlled. The greatest advantage of these atomisers is the minute dimensions of the droplets produced and their thorough mixing in the compressed air that, due to its speed, distributes the aerosol in the room and consequently allows quick absorption. These units can therefore be readily used for direct cooling in rooms, and are ideal for the textile industry, wood and paper processing, and storerooms, where there is almost always a supply of compressed air.
mc multizone features an electronic controller that manages the supply of water and compressed air to the nozzles.
Water atomisation is managed by an external control signal or, in the case of stand-alone control, so as to maintain the humidity/temperature set point. The unit also manages a series of automatic cycles, such as nozzle cleaning and washing.
The system has the ability to control humidity independently in multiple zones (rooms, AHUs, cold rooms) using a main/secondary layout. The layout has one master and multiple clients (up to 5) connected in a pLAN. The master is fitted with a display for accessing the readings, viewing the status and messages on the master and clients. The clients have their own internal controller and can be set to continue operating even if connection to the master is interrupted.
FSW63 – 100
The Fral FSW series fixed dehumidifiers are high-performance appliances, usable in a variety of applications. They are particularly suited to dehumidify swimming pool environments, since they are resistant to corrosion due to chlorine. They feature a high efficiency air filter in polyurethane, washable and easily replaceable, and the possibility of direct drain. Optionally, it is possible to install a condensate lifting pump that allows condensate pumping up to a height of 3.5 meters from the machine positioning level. The Fral fixed dehumidifiers series FSW can be equipped with electrical resistances or hot water coil for heating. Their elegant design makes them particularly suitable for installation in special environments such as libraries and offices.
FR3050 – 5050
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil, Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
FDK44 – 100
The Fral professional fixed dehumidifiers of the series FDK are high-performance, compact, easy to install appliances and can be used in multiple applications. They feature a high-efficiency filter in polyurethane, washable and easily replaceable, which can be connected to a fixed drain. They are equipped with strong handles for easy handling, rubber feet and an onboard mechanic humidistat. The Fral industrial dehumidifiers of the series FDK are equipped as standard with a Hot Gas defrosting system, with electronic and thermostatic control, and can work with temperatures close to 0 °C.
FR7000 – 26000
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil, Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
Steam distribution systems
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
These accessories are available for the humiSteam, compactSteam, heaterSteam and gaSteam humidifiers.
The CAREL range of accessories for isothermal humidifiers have been especially developed to allow the creation of humidification systems that are complete and suitable for all types of application.
The fundamental idea is to guarantee optimum operation of the humidification system by providing the installer, maintenance personnel and user all the auxiliary components that simplify installation, steam distribution, operation and control of the humidifier.
The new high-efficiency linear steam distributors are the first to feature thermal insulation so as to reduce condensation in the ducting.
This innovation brings extremely positive results in terms of energy efficiency: tests have in fact shown a reduction of at least 20% in condensation when compared to standard steam distributors.
Centralised steam distributors
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
ultimateSAM is a pressurised or atmospheric-pressure steam distributor, designed to distribute dry steam uniformly and efficiently in ducts or air handling units. SAM stands for Short-Absorption Manifold, meaning a steam distributor with a short absorption distance (even less than 200 mm).
It has been designed to be “made to measure” for the AHU or duct, while ensuring low air heat gain (max. 2 °C/4 °F). All of the metal parts installed inside the AHU or duct are made from AISI 304 steel, so as to guarantee hygiene and a long operating life.
The features of the ultimateSAM steam distribution system make it the perfect system for all AHU/duct humidification needs, providing designers, installers and service personnel with the best possible solution.
The wide range of products, with a vast choice of steam flow-rates and numerous options, make it the ideal system for various applications, including hospitals and the pharmaceutical industry.
Resistive steam humidifier
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
The air humidification technology currently on the market has made a significant step forwards with the upgraded CAREL heaterSteam range of high-precision heater humidifiers, available in models from 2 to 80 kg/h.
The product has been overhauled in every aspect, from its mechanical components to the new electronic controller with graphic interface based on the c.pCO platform. The new software functions make heaterSteam even more reliable and versatile, while its extensive connectivity allows seamless communication with any BMS system. These improvements mean heaterSteam is the ideal solution for all high-tech applications.
heaterSteam Titanium, the world’s only humidifier with titanium heaters, represents the pinnacle of this family of cutting-edge humidifiers. heaterSteam titanium not only stands out for its performance in terms of precision and continuous modulation in humidity control, but also for having achieved unprecedented levels of reliability.
heaterSteam process completes the range of the heater humidifiers, offering a modular and flexible solution. The heaters used on heaterSteam process have been designed and developed to work even when the feedwater characteristics are not able to be controlled or are variable over time: a reliable and versatile solution.
Humidification
Dehumidification
HVAC Measuring instruments
HVAC Sensors & Field Devices
Air Particles Counting
Microbial Air Sampler