FRS150 – 300
The series FRS Dehumidifiers are perfect for smaller applications that require hard working humidity control and long term performance reliability. The special design layout that allows very easy access to all of the components for service and installation.
Ask for a quotation
RELATED PRODUCTS
FR850 – 1150T
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil ,Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
FRE2500 – 19000
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Tailored to Customers exact requirements and with high efficenty performarce in order to reduce the power consumption.
Ultrasonic humidifiers
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
The new humiSonic range comprises two versions, meeting the needs of all applications: humiSonic compact, small enough to be installed on a fan coil, and humiSonic direct, for room distribution.
Ultrasonic humidifiers feature a small water storage tank and piezoelectric transducers installed at the bottom of the tank. The surface of the transducer vibrates at very high speed (1.65 million times a second), a speed that does not allow the water to move due to its inertial mass. During the negative amplitude of the transducer cycle, a sudden void is created that brings about the production of microscopic bubbles, which are pushed to the surface of the water during the positive amplitude of the cycle. This effect is called cavitation.
During this process, the resulting intersecting sound waves created directly underneath the surface of the water cause very small droplets of water to separate, forming a fine mist of vapour that is immediately absorbed by the flow of air.
This ultrasound technology applied to CAREL air humidification solutions is efficient, reliable and versatile:
- efficient, as ultrasonic humidifiers guarantee energy savings of 90% when compared to ordinary steam generators;
- reliable, as humiSonic is guaranteed for 10,000 operating hours when running on demineralised water;
- versatile, thanks to the size of the droplets produced (average diameter of 5 µm).This fundamental characteristic guarantees very fast absorption of the atomised water in the room or duct, avoiding possible condensation.
Compressed air water atomisers
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
Compressed air humidifiers are the ideal humidification solution whenever a compressed air supply is available, as is the case in many industrial applications, even if humidification systems are often fitted with a dedicated air compressor. The humidifier essentially consists of a cabinet fitted with electronic controller that, using two independent connection pipe networks, supplies the spray nozzles with compressed air and water at the ideal pressure for instant operating conditions.
The units can be installed inside an AHU or directly in the room where humidity needs to be controlled. The greatest advantage of these atomisers is the minute dimensions of the droplets produced and their thorough mixing in the compressed air that, due to its speed, distributes the aerosol in the room and consequently allows quick absorption. These units can therefore be readily used for direct cooling in rooms, and are ideal for the textile industry, wood and paper processing, and storerooms, where there is almost always a supply of compressed air.
mc multizone features an electronic controller that manages the supply of water and compressed air to the nozzles.
Water atomisation is managed by an external control signal or, in the case of stand-alone control, so as to maintain the humidity/temperature set point. The unit also manages a series of automatic cycles, such as nozzle cleaning and washing.
The system has the ability to control humidity independently in multiple zones (rooms, AHUs, cold rooms) using a main/secondary layout. The layout has one master and multiple clients (up to 5) connected in a pLAN. The master is fitted with a display for accessing the readings, viewing the status and messages on the master and clients. The clients have their own internal controller and can be set to continue operating even if connection to the master is interrupted.
FR7000 – 26000
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil, Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
Steam distribution systems
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
These accessories are available for the humiSteam, compactSteam, heaterSteam and gaSteam humidifiers.
The CAREL range of accessories for isothermal humidifiers have been especially developed to allow the creation of humidification systems that are complete and suitable for all types of application.
The fundamental idea is to guarantee optimum operation of the humidification system by providing the installer, maintenance personnel and user all the auxiliary components that simplify installation, steam distribution, operation and control of the humidifier.
The new high-efficiency linear steam distributors are the first to feature thermal insulation so as to reduce condensation in the ducting.
This innovation brings extremely positive results in terms of energy efficiency: tests have in fact shown a reduction of at least 20% in condensation when compared to standard steam distributors.
Immersed electrode humidifiers
This product is available in CAREL CPQ, the sizing and selection tool that lets you independently find the right CAREL solutions for you, download the related documentation, receive support, and generate quotes and orders.
The operation of immersed electrode humidifiers is based on a very simple physical principle. As common drinking water contains a certain quantity of dissolved mineral salts, and is consequently slightly conductive, applying a voltage to metal electrodes immersed in the water creates an electric current that heats the water (Joule effect) until boiling, thus producing steam.
The quantity of steam produced is proportional to the electric current, which is in turn proportional to the water level.
This electric current is measured by a current transformer: by varying the level of water using a fill solenoid valve and due to the evaporation process, the current, and consequently steam production, can be modulated. Due to evaporation, the level of water decreases and must therefore be topped up. As the steam produced does not carry mineral salts, the salt concentration in the water and therefore the conductivity increases, and has to be periodically diluted by draining part of it using the drain pump and replacing it with new water.
In addition, scale forms over time and covers part of the cylinder, which must be replaced or cleaned. The principle is simple, however the development of an immersed electrode humidifier that ensures safe operation and reliability over time requires careful analysis and extended testing.
Compared to electric heater or gas-fired humidifiers, immersed electrode humidifiers:
are less expensive to purchase;
operate with drinking water (not completely demineralised or softened);
require periodical replacement (or cleaning) of the cylinder;
feature modulation suitable for comfort or industrial applications, without extreme requirements.
CAREL has been manufacturing immersed electrode humidifiers since the 1970s and can draw benefit from its know-how in the field of electronic controllers: precision control, reliable electronics and sophisticated and complete control software.
The CAREL solutions for immersed electrode humidifiers are humiSteam and compactSteam.
FR3050 – 5050
The FR series dehumidifier are equipped with a high capacity rotor wheel and is designed for the larger and more challenging applications than the smaller series FR. The special design layout that allows very easy access to all of the components for service and installation. The FR range is able of ensuring dehumidification process even in extreme conditions from -20°C to +40°C and reaching dew points down to -60°C tdp therefore ensuring a continuous and controlled treatment.
Compact Design; Open design layout allows Extremely Easy Service, Stainless Steel for long term reliability, PLC control with display terminal. As optional the machne can be equipped with Recovery regeneration heat, Pre-cooling water coil, Post-cooling water coil, Post-heating water coil. RS485 ModBus Interface or other protocols and other accessories or special customisation on request or different voltage.
FDK44 – 100
The Fral professional fixed dehumidifiers of the series FDK are high-performance, compact, easy to install appliances and can be used in multiple applications. They feature a high-efficiency filter in polyurethane, washable and easily replaceable, which can be connected to a fixed drain. They are equipped with strong handles for easy handling, rubber feet and an onboard mechanic humidistat. The Fral industrial dehumidifiers of the series FDK are equipped as standard with a Hot Gas defrosting system, with electronic and thermostatic control, and can work with temperatures close to 0 °C.
Humidification
Dehumidification
HVAC Measuring instruments
HVAC Sensors & Field Devices
Air Particles Counting
Microbial Air Sampler